
























Emergency light with self-test 5W 580lm, 3600 mAh LiFePO₄ battery 3 h autonomy, AC100-277V 50/60Hz , surface or recessed installation, permanent and non-permanent mode
Estimated delivery in 1–2 business days
30-day returns
Customer support 9:00–24:00
Product description
The WL105-AT LED emergency light is designed for indoor installation and provides automatic lighting in the event of a power outage. It features 50 LEDs, with a power of 5 W, a luminous flux of 580 lm, and a color temperature of 6000 K —cool white—.
Equipped with a LiFePO₄ battery of 2 × 1800 mAh, 3.2 V, it offers an autonomy of 3 hours in emergency operation. It supports 100–277 V AC power supply and allows for surface-mounted or recessed installation, with a recessed installation kit included.
Two operating modes depending on the wiring
- Permanent: remains lit while mains power is available and continues to illuminate via the battery during a power outage.
- Non-permanent: turns on automatically only when the power supply fails.
Autotest and status monitoring
The Autotest system performs an automatic monthly test of 5 minutes and an annual test of 30 minutes. It also allows a manual test to be initiated using the TEST button. After each manual test, the automatic testing cycle restarts from the moment the button is pressed.
The indicator lights allow the status of the equipment to be identified: solid green for mains power present and equipment ready; solid red during charging; and flashing yellow for fault indication.
Technical specifications
- Model: WL105-AT.
- Power: 5 W.
- Luminous flux: 580 lm.
- Color temperature: 6000 K.
- Number of LEDs: 50.
- Power supply: 100–277 V AC.
- Battery: LiFePO₄, 2 × 1800 mAh, 3.2 V.
- Emergency autonomy: 3 hours.
- Surface-mounted dimensions: 238 × 80 × 37 mm.
- Dimensions with recessed installation kit: 265 × 106 × 40 mm.
- Recessed cutout dimensions: 250 × 90 mm.
- Installation: surface-mounted or recessed, with kit included.
- Configuration: permanent or non-permanent via wiring.
Electrical safety and electromagnetic compatibility
The technical documentation includes electrical safety and electromagnetic compatibility tests under the framework of Directives 2014/35/EU (Low Voltage) and 2014/30/EU (EMC), in accordance with the following standards:
- EN 60598-1:2021 + A11:2022 and EN 60598-2-22:2022: general and specific safety requirements for luminaires and emergency lighting.
- EN IEC 55015:2019 + A11:2020 and EN IEC 61547:2023: radio emissions and electromagnetic immunity of lighting equipment.
- EN IEC 61000-3-2:2019 + A1:2021 + A2:2024 and EN 61000-3-3:2013 + A1:2019 + A2:2021: limits for harmonic currents, voltage fluctuations, and flicker in the electrical grid.
Shipping & returns
Shipping to Spain
- Standard shipping: 3,95 €
- Free shipping from 19,95 €
- Estimated delivery in 1–2 business days
We ship from our warehouse in Barcelona.
Delivery time, shipping cost and the free-shipping threshold depend on the destination country or zone selected. See the conditions for your destination above.
The times shown are estimates for in-stock products and may vary due to public holidays, remote areas, carrier incidents or high-volume orders.
Bulky, extra-long or unusually heavy products, or those shipped in several parcels, may be subject to different transport conditions and may not be included in the standard free-shipping conditions. The final cost will be shown before you complete your order.
Returns
You have up to 30 days from receiving your order to request a return.
For returns due to a change of mind, an error in the choice of colour, size or model, or other reasons not attributable to Alpinaluz, the return shipping costs are borne by the customer. If you use a return label provided by Alpinaluz, its cost may be deducted from the amount to be refunded.
The product must be returned complete, unmodified and with all its accessories and components. We recommend keeping and using the original packaging to protect the product properly during transport.
The absence or deterioration of the original packaging does not automatically mean the return will be rejected. However, if the condition of the product, or the lack of packaging, accessories or protections, causes a loss of value, damage or the need for refurbishment, the refund amount may be reduced proportionally after inspection of the product.
Products cut to size, modified or irreversibly altered will not be accepted within the commercial return, except where there is a defect or lack of conformity covered by applicable regulations.
If you have received a defective, transport-damaged, incomplete or incorrect product, please contact us before returning it. Once the issue has been verified, Alpinaluz will handle the solution and the corresponding costs.
The refund will be processed once the product has been received and inspected.
Warranty
Alpinaluz products come with a 3-year warranty against manufacturing defects and lack of conformity, without prejudice to the consumer's applicable legal rights.
When a product has specific or additional coverage, this will be indicated in its technical data sheet.
To handle a claim, it will be necessary to identify the order or invoice and provide the information needed to verify the problem, such as photographs, videos or operating tests. Where necessary, we may request the return of the product for inspection.
The warranty covers manufacturing defects and lack of conformity under normal conditions of use.
The warranty does not cover damage resulting from:
- incorrect installation or installation contrary to the instructions;
- inadequate voltage, power supply or electrical connection;
- use of incompatible drivers, dimmers, transformers, bulbs or accessories;
- impacts, breakage or damage occurring after delivery;
- moisture or outdoor installation when the product does not have the appropriate IP rating;
- use contrary to the product specifications;
- normal wear and tear;
- unauthorised handling, modification or repair;
- misuse or negligence.
If a defect covered by the warranty is confirmed, Alpinaluz will provide the corresponding solution in accordance with applicable regulations, including, where appropriate, repair, replacement, price reduction or refund.
Choose options
Buy in bulk
Do you have a project or need to buy in bulk?
We work with professionals, shops, hotels, restaurants and installers to provide decorative and technical lighting solutions at competitive prices.
- Direct from the factory, no middlemen
- Fixed professional pricing after approval
- Better quotes for large volumes
- Technical advice and product selection
- Technical documentation and certificates by product
- Customisation available depending on the project
Brand story
Alpinaluz: decorative and professional lighting at direct prices
At Alpinaluz we select lighting solutions for homes, businesses and professional projects, combining design, functionality and excellent value for money. We work with direct supply to cut out middlemen and offer competitive products, with stock available, personal support and help for bulk purchases.
🏭 Direct from the factory
💡 Decorative and professional lighting
⭐ Excellent value for money
📦 In-stock availability
🏗️ Support for projects and bulk orders
📞 Extensive customer service


